銷售：鐘：

SYSKON P500-P800-P1500, P3000 and P4500、SYSKON P500-P800-P1500, P3000 and P4500

Computer Controlled Laboratory Power Supply

Series SYSKON (SYSTEM KONSTANTERs) are manual and remote controllable DC power supplies for laboratory and system use. Owing to the highest quality in switching controller technology, the devices are compact and lightweight despite their high output power. Active power factor control assures nearly sinusoidal mains input current. The floating output features “safety separation” from the mains input as well as from the computer interfaces, and is classified as a safety extra-low voltage circuit (SELV) in accordance with VDE / IEC.

Wide ranging nominal output power values are available from output voltage and output current. The power output is voltage and current controlled with limiting to maximum available power. Transition to the control modes is automatic in accordance with the selected set points and load circumstances. The control loops are designed for short response times. An automatically activated, dynamic sink (can be disabled) provides for quick discharging of the output capacitors. Numerous protective functions and monitoring devices allow for ideal adaptation to actual conditions of use.

• Series SYSKON P500 thru P4500 (500W to 4500 W output power)

• Measuring functions for voltage, current and power with threshold memory (min & max values)

• Minimal residual ripple and short response times

• USB, RS232C Interface (standard) IEEE488 Interface (plug-in module option)

• Integrated sequence function for the generation of voltage and current profiles with programmable sequence chain

• Storage of 12/15 device configurations (setup memory)

• Storage of 1536/1700 sequence parameters

• Output can be switched on and off

• Operating functions can be protected

• Master-slave operation is possible

• Overvoltage, overcurrent and excessive temperature protection

• Compact design, lightweight and minimal power loss thanks to switching controller technology

• PC Software for remote control