您好, 歡迎來到化工儀器網
6247C / 6247G直流電壓電流源/監控器，專為評估需要高效率和低功耗的高壓半導體和LED燈具而設計。 它能夠輸出高達+250 V的電壓和高達±320 mA的電流，并具有高源（100μV/ 100 pA）和測量（10μV/ 10 pA）分辨率。6247C / 6247G配有各種掃描和測量功能。
產品分類品牌分類
-
分析儀 低電平靈敏專用儀器 LoRa測試儀 端口遠程采樣探頭前端 電源自動測試系統 電時鐘恢復 功率表 交直流電源電子負載 直流電子負載 數字電壓表 函數/任意波形發生器 數字功率計 FC掃描儀 阻抗測試儀 閃變分析儀 電容測試儀 電池測試儀 泄漏電流測試儀 地線導通測試儀 絕緣電阻計 耐壓測試儀 絕緣電阻測試儀 電子負載裝置 塔式無源互調分析儀 超高電阻計 雙通道數字萬用表 驅動器步行測試掃描儀 變頻器測試軟件 開放式開關和控制平臺 CMW配件 屏蔽射頻測試盒。 射頻屏蔽盒 射頻暗室 天線測試系統 矢量網絡分析儀 手持頻譜分析儀 序列發生器軟件工具 便攜式無線電測試儀 無線電測試裝置 無線連接測試儀 通信制造測試儀 平臺 數字萬用表 手持式光功率計 步進衰減器 數據記錄器 電源系列 寬帶放大器 音頻/視頻/廣播音序器 數字視頻信號源 視頻測試儀 廣播電視路測軟件 自動電視頻道掃描軟件 手持式電視分析儀 數字電視監控系統系列 有線電視分析儀和泄漏檢測儀 小型電視分析儀 高級流合成器 衛星負載發生器 電纜負載發生器 緊湊型調制器 測試發射機 廣播電視測試系統 信號分析儀 信息娛樂測試系統 測試系統多功能平臺 音頻切換器 音頻分析儀 功率反射儀 空中傳輸 功率測量 頻率選擇功率傳感器 三通道二極管功率探頭 測試接收機 毫米波變換器 網絡分析儀 信號發生器 信號與頻譜分析儀 測量接收機 相位噪聲分析儀 FSW 信號與頻譜分析儀 USB協議分析儀 藍牙協議分析儀 Bluetooth 示波器
產品簡介
詳細介紹
6247C / 6247G直流電壓/電流源/監視器
簡要描述;簡介
6247C / 6247G是一款直流電壓電流源/監控器，專為評估需要高效率和低功耗的高壓半導體和LED燈具而設計。 它能夠輸出高達+250 V的電壓和高達±320 mA的電流，并具有高源（100μV/ 100 pA）和測量（10μV/ 10 pA）分辨率。 6247C / 6247G配有各種掃描和測量功能。 它提供與多個單元和其他儀器的同步操作，使其非常適用于電子元件測試系統。
6247C / 6247G直流電壓/電流源/監視器
關鍵事實
-15 V至+250 V / 0至±320 mA
直流和脈沖操作
測試高壓LED燈具
GPIB / USB（6247G）或RS232 / USB（6247C）接口
Specifications
| Voltage Source/Measurement Range | ||||
| Range | Source Range | Setting Resolution | Measurement Range | Measurement Resolution |
| 5 V | -1.0000 to +5.0000 V | 100 μV | -1.00999 to +5.00999 V | 10 μV |
| 50 V | -10.000 to +50.000 V | 1m V | -10.0999 to +50.0999 V | 100 μV |
| 250 V | -15.00 to +250.00 V | 10m V | -15.099 to +250.999 V | 1m V |
| Current Source/Measurement Range | ||||
| Range | Source Range | Setting Resolution | Measurement Range | Measurement Resolution |
| 3 μA | 0 to ±3.2000 μA | 100 pA | 0 to ±3.20999 μA | 10 pA |
| 30 μA | 0 to ±32.000 μA | 1 nA | 0 to ±32.0999 μA | 100 pA |
| 300 μA | 0 to ±320.00 μA | 10 nA | 0 to ±320.999 μA | 1 nA |
| 3 mA | 0 to ±3.2000 mA | 100 nA | 0 to ±3.20999 mA | 10 nA |
| 30 mA | 0 to ±32.000 mA | 1 μA | 0 to ±32.0999 mA | 100 nA |
| 300 mA | 0 to ±320.00 mA | 10 μA | 0 to ±320.999 mA | 1 μA |
| Resistance Measurement Range | ||||
| Range | Measurement Range | Measurement Resolution | ||
| Determined by voltage range/current range calculations | 0 Ω to 125 GΩ | Minimum 30 µΩ | ||
| Output Noise | ||||
| For voltage source, within the range from no load to the maximum load [Vp-p] For current source, at the following load [Ap-p] | ||||
| Range | Load resistance | Low Frequency Noise | High Frequency Noise | |
| DC to 100 Hz | DC to 10 kHz | DC to 20 MHz | ||
| 5 V | - | 200 μV | 400 μV | 10 mV |
| 50 V | - | 300 μV | 1 mV | 10 mV |
| 250 V | - | 500 µV | 5 mV | 10 mV |
| Source and measurement function | |
| DC source and measurement | Source and measurement of DC voltage and current |
| Pulse source and measurement | Source and measurement of pulse voltage and current (However, measurement auto range in pulse source is impossible) |
| DC sweep source and measurement | Source and measurement by Linear, Two slope linear, Random and Fixed levels |
| Pulse sweep source and measurement | Source and measurement by Linear, Two slope linear, Random and Fixed levels(However, measurement auto range in pulse source is impossible) |
| Integration Time | 9 types available: 100 μs, 500 μs, 1 ms, 5 ms, 10 ms, 1PLC, 100 ms, 200 ms and S/H S/H: Sample hold (integration time: 100 μs) measurement (Enabled only in the pulse source and pulse sweep source modes.) (PLC: Power Line Cycle 50 Hz: 20 ms, 60 Hz: 16.66 ms) |
| Sweep Mode | Reverse ON (round) / OFF (one way) |
| Sweep repeat count: | 1 to 1000 times or infinite |
| Maximum number of sweep steps | 8000 steps |
| Random Sweep Maximum Memory | 8000 data |
| Measurement data memory | 8000 data |
| Measurement Auto Range | Available only in VSIM or ISVM |
| Measurement Function Link Mode | Links the source function to the measurement function (VSIM or ISVM) ON/OFF available |
| Limiter | The HI and LO limiters can be set individually. (However, current limiters of the same polarity are not allowed.) |
| Calculation Functions | NULL calculation Comparator calculation (HI/GO/LO) Scaling calculation MAX/MIN/AVE/TOTAL calculation |
| Trigger Style | Auto-Trigger, external Trigger |
| Output Terminal | Front; Safety sockets, HI OUTPUT, HI SENSE, LO OUTPUT, LO SENSE |
| Maximum input | +250 V/-15 V peak Max (between HI-LO) 2 V peak Max (between OUTPUT and SENSE) 250 V Max (between LO and chassis) |
| Maximum Remote Sensing Voltage | ± 1 V MAX HI OUTPUT - HI SENSE, LO OUTPUT - LO SENSE (The voltage between HI SENSE and LO SENSE must be within the maximum output voltage range) |
| Voltage measurement input resistance | 10 GΩ or higher |
| Voltage measurement input leak current | ±100 pA or lower |
| Interface Function | |
| GPIB | (6247G only) Compliant with IEEE-488.2-1987 Interface function; SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT1, C0, E2 Connector; Amphenol 24 pin |
| RS-232 | (6247C only) Compliant with EIA232C (RS-232) Baud rate; 19200, 9600, 4800, 2400, 1200, 600, 300 Parity; even, odd and none Number of data bits; 7 bits, 8 bits Number of stop bits; 1 bit, 2 bits Connector; Dsub 9 pin |
| USB interface | USB 2.0 Full-speed Connector; Type B |
| External control signal | TRIGGER IN, INTERLOCK, OPERATE IN, OPERATE OUT,SYNC OUT Connector; BNC |
| General Specification | ||||
| Operating environment: | Ambient temperature: 0 ºC to +50 ºC Relative humidity: 85% or less, no condensation | |||
| Storage environment: | Ambient temperature: -25 °C to +70 °C Relative humidity: 85% or less, no condensation | |||
| Display: | 60 minutes or more | |||
| Power supply: | AC power supply 100 V/120 V/220 V/240 V (User selectable) | |||
| Option number | Standard | OPT. 32 | OPT. 42 | OPT. 44 |
| Power voltage | 100 V | 120 V | 220 V | 240 V |
| Specify the option when ordering. Use a power cable and a fuse that are compliant with the safety standard when changing the power supply voltage. | ||||
| Power consumption: | Approx. 212 (W) x 88 (H) x 450 (D) mm | |||
| Mass: | 7.3 kg or less | |||
| Safety: | Compliant with IEC61010-1 Ed.3 | |||
| EMI: | EN61326-1 class A | |||