您好, 歡迎來到化工儀器網
產品簡介
詳細介紹
NSS ACSS中性試驗箱 | |||||
規格SPECIFICATION | RST-180T | RST-510T | RST-900T | RST-1300T | RST-1500T |
CASS腐蝕試驗箱 | |||||
規格SPECIFICATION | RCA-180T | RCA-510T | RCA-900T | RCA -1300T | RCA-1500T |
內容積Inside capacity公升Litre | 180 | 500 | 900 | 1300 | 1500 |
設備內部尺寸（Insidedimensions ）mm 寬W | 700 | 1100 | 1400 | 2000 | 2300 |
深D | 500 | 780 | 980 | 980 | 980 |
箱體 高H | 400 | 500 | 550 | 550 | 600 |
箱蓋 高H | 100 | 100 | 120 | 120 | 120 |
總高H | 500 | 600 | 670 | 670 | 670 |
外箱zui大尺寸（Outsidedimensions）mm 寬W | 1280 | 1580 | 2180 | 2380 | 2680 |
深D | 810 | 1110 | 1380 | 1630 | 1630 |
總高H | 1280 | 1380 | 1550 | 1550 | 1550 |
鹽水箱容積Salt water tank volume | 40 | 140 | 140 | 140 | 140 |
電源Power supply | AC220V 50HZ | ||||
重量（KG）（Weight）(Approx) | 300 | 400 | 500 | 600 | 700 |
試驗箱Test Chamber | 試驗箱內沒有其它裝置，因此可zui大的利用空間。一個樣品插裝架包括在標準配置內 The test chamber comprises no other equipment, thus maximising use of available space. A specimen holding device for standard plates is included in the standard equipment. | ||||
噴嘴位于試驗箱上部的右側，噴霧開關打開在他的頂部和下部產生鹽霧，與鹽溶液接觸的噴嘴、壓縮空氣管路和鹽溶液管及任何其它部件均由塑料制造。 The spray nozzle is located in the upper part on the right side of the test chamber. The spray channel has an opening for salt fog on its top and bottom. Spray nozzle,tubes for compressed air and brine and any other parts that come into contact with the salt solution are made of plastic. | |||||
使用后的鹽溶液由試驗箱底部排放，過剩的鹽霧通過排氣裝置散發。 The used salt solution is drained via the drainage in the test chamber floor. Excess salt mist is emitted through the exhaust air fitting. | |||||
鹽霧噴射Spraying of the Salt Fog | 集成在操作面板中的流量計可以設置和監測鹽溶液的流量 The brine flow volume can be set and monitored at the flow meter which is integrated in the operating panel. | ||||
在內置的壓縮空氣系統設置壓縮空氣量，通過加濕系統導入噴嘴，壓縮空氣將鹽溶液從鹽溶液箱中吸出，再噴射分布于試驗箱中，噴霧通道中的丙烯酸玻璃噴嘴保證*的鹽霧分布于試驗空間 The volume of compressed air set on the built-in reducing air unit is passed through the humidification system to the spray nozzle. There, the salt solution is sucked out of the brine supply reservoir by means of compressed air distributed in the test chamber by injection. The acrylic glass nozzle in the spray channel ensures an optimum distribution of the spray fog inside the test space. | |||||
溫度調節器Temperature Conditioning | 試驗的溫度調節采用低電壓加熱元器件，加熱元器件固定于試驗箱內膽外部 The test chamber is conditioned by low voltage electricheating elements. The heating elements are fixed at the outside of the test chamber. | ||||
內外箱材料Internal External material | 進口PVC板材﹠PP | ||||
試驗室溫度testing temperature | NSS ACSS: 35℃±1℃ / CASS: 50℃±1℃ | ||||
壓力桶溫度air temperature | NSS ACSS: 47℃±1℃ / CASS; 63℃±1℃ | ||||
噴霧方式 spray mode | 連續,間歇噴霧可選continuously or interrupted | ||||
溫度分布均勻度(Temperature uniformity℃) | ±1℃ | ||||
主要裝置（MAJOR DEVICE） | |||||
加水系統Water adding system | 采用自動加水補充系統Auto adding water | ||||
水質(Water quality) | 蒸餾水（Distilled water only）， | ||||
控制器（Controller） | 溫濕度控制器7.0寸真彩觸摸屏/中文或英文輸入 Temperature and humidity controller 7.0 TFT Touch Screen/Chinese or English language | ||||
環境溫度（Environmental temperature） | 5～30℃ | ||||
擴充設備（Optional accessories） | 鹽霧試驗室，濕熱鹽霧箱，二氧化硫 | ||||
1,性能測定于環境溫度為+23℃時，箱內無負荷的條件下。（Performance measured at ambient temperature of+23℃ without load 2,以上規格,以實體及報價單為準。For above accessories, their actual specifications may vary | |||||