 |
長沙思辰儀器科技有限公司
主營產品： 便攜式油液污染顆粒度測定儀.油液污染度測定儀 |
11
聯系電話
|
長沙思辰儀器科技有限公司
主營產品： 便攜式油液污染顆粒度測定儀.油液污染度測定儀 |
聯系電話
2023-3-24 閱讀(659)
1. The temperature of the cold bath and the cold trap are controlled by a segmented program. The cold bath part adopts a metal bath technology that integrates condensing tubes and refrigeration evaporation tubes, ensuring direct conduction of cold and heat without liquid heat transfer media, which is both safe and convenient
2. The instrument adopts a lifting and self-locking lifting control technology, which allows the heating furnace to quickly lift and fall back, allowing it to stay at any position, truly realizing the technology of non polarity adjustment
3. The heating furnace adopts a ceramic heating device pulse modulated infrared radiation heating method, with fast heating and cooling speed, ensuring safety and reliability
4. Compressors, heating ceramic components, temperature sensors, and refrigeration diverter valves are all imported components, ensuring the accuracy and reliability of instrument data, while maintaining a long service life and low failure rate
5. The test data can be stored without restriction and viewed at any time. The built-in micro thermal printer outputs the test results, and can also be exported through a USB flash drive to print data reports on the computer;
6. After the experiment, the furnace frame automatically slides down, cutting off heat and waste heat, and the electric furnace cooling fan can automatically start rapid cooling to improve the test efficiency
7. Infrared modulation optical technology realizes liquid level tracking detection and initial distillation detection without environmental interference, automatically detects the position of volume zero point and accurately judges the dry point
8. Coated quartz orifice plate, heat insulation without cracking, unique orifice plate installation structure, replacement of orifice plates with different apertures without adjustment
9. Optional laboratory intelligent control module system can be equipped to achieve remote intelligent information management of the Internet of Things. The cloud platform can monitor the operation status of this instrument in real time, including user information, usage time, test duration, usage frequency, different usage scenarios, and other data.
1. Working power supply: AC220V ± 10% 50Hz 1.6KW
2. Operation mode: Windows operating system 10.4 inch color LCD touch screen
3. Temperature range: 0~450 ℃, resolution 0.1 ℃, imported from Germany PT100 temperature sensor
4. Refrigeration method: German imported compressor refrigeration
5. Distillation rate: 2-10 mL/min (freely set, automatically adjusted)
6. Volume detection range: 0-100mL, resolution 0.1mL
7. Cold bath temperature range: 0~80 ℃, temperature control accuracy: 0.2 ℃
8. Cold trap temperature range: 0~60 ℃, temperature control accuracy: 0.2 ℃
9. Air pressure measurement range: 300~1100hpa, accuracy ± 3hpa, built-in pressure sensor, automatic value correction
10. Safety protection system: built-in ultraviolet flame sensor automatically monitors and automatically opens the protective gas valve in case of flame
Protective gas interface: φ 7.5～8mm； The protective gas is nitrogen or carbon dioxide, and the pressure is not less than 0.6Mpa
12. Overall dimensions of the instrument: 460X500X660cm (length/width/height), net weight: about 70kg
13. Operating ambient temperature: 5~40 ℃ Operating relative humidity: ≤ 80%
1. The temperature of the cold bath and the cold trap are controlled by a segmented program. The cold bath part adopts a metal bath technology that integrates condensing tubes and refrigeration evaporation tubes, ensuring direct conduction of cold and heat without liquid heat transfer media, which is both safe and convenient
2. The instrument adopts a lifting and self-locking lifting control technology, which allows the heating furnace to quickly lift and fall back, allowing it to stay at any position, truly realizing the technology of non polarity adjustment
3. The heating furnace adopts a ceramic heating device pulse modulated infrared radiation heating method, with fast heating and cooling speed, ensuring safety and reliability
4. Compressors, heating ceramic components, temperature sensors, and refrigeration diverter valves are all imported components, ensuring the accuracy and reliability of instrument data, while maintaining a long service life and low failure rate
5. The test data can be stored without restriction and viewed at any time. The built-in micro thermal printer outputs the test results, and can also be exported through a USB flash drive to print data reports on the computer;
6. After the experiment, the furnace frame automatically slides down, cutting off heat and waste heat, and the electric furnace cooling fan can automatically start rapid cooling to improve the test efficiency
7. Infrared modulation optical technology realizes liquid level tracking detection and initial distillation detection without environmental interference, automatically detects the position of volume zero point and accurately judges the dry point
8. Coated quartz orifice plate, heat insulation without cracking, unique orifice plate installation structure, replacement of orifice plates with different apertures without adjustment
9. Optional laboratory intelligent control module system can be equipped to achieve remote intelligent information management of the Internet of Things. The cloud platform can monitor the operation status of this instrument in real time, including user information, usage time, test duration, usage frequency, different usage scenarios, and other data.
