Heated Microincubators加熱微溫箱現貨

Heated Microincubators加熱微溫箱現貨

Heated chamber-incubator for replaceable coverslips, TC-CSC
Can be used for imaging and recording. Consists of a heated bottom base, and a silicone O-ring to seal the
coverslip. The metal base facilitates heat transfer. There is no contact between solution and the chamber
base to prevent ions leakage. The included top glass coverslip can be used to seal your sample from top
as well - to from a micro-incubator. The top can be secured using the included metal ring, or using flat
springs of microscope adapters. The bottom part has a recessed profile to fit round or square coverslips
The included O-rings allows you to use different thickness coverslips. Simply put the coverslip inside and
seal it with silicone ring by a snap-in action, then secure with a top metal ring (the silicone ring can be also
secured by flat springs of microscope adapters). For low-profile chambers, conside TC-CSC -L design,
where no top clamps are required. Can be used as a perfusion chamber, if combined with miniature tubing
holders. The heating element incorporates replaceable Teflon perfusion tubing inside, which makes the
element to work as inline pre-heater. Requires a microscope adapter and a temperature controller TC2-80-
150-C. Item# TC-CSC
• Dimensions: 50mm diameter
• Temperature stability: better than 0.01°C,
built-in sensor
• Solution Pre-heater: Replaceable/Removable
Teflon tubing, easy to was
• Microscope adapter: Fits to 50mm cutout of
standard microscope adapters MA and IMA
• Working volume:
25mm coverslip - 21mm, approx. 350 microl
22x22mm coverslip - 19mm, approx. 280 microl
20mm coverslip - 16mm, approx. 200 microl
18mm coverslip - 14mm, approx. 150 microl
13mm coverslip - 9mm, approx. 50 microl
12mm coverslip - 8mm, approx. 50 microl
10mm coverslip - 6mm, approx. 30 microl
Heated micro-incubators
Catalog No. Description
TC-CSC-25 Heated chamber for replaceable 25m round coverslips
TC-CSC-20 Heated chamber for replaceable 20mm round coverslips
TC-CSC-18 Heated chamber for replaceable 18mm round coverslips
TC-CSC-13 Heated chamber for replaceable 13mm round coverslips
TC-CSC-12 Heated chamber for replaceable 12mm round coverslips
TC-CSC22x22
Heated chamber for replaceable 22x22mm square
coverslips
CS-30 Replacement top glass cover for CSC holders, 30mm
diameter

可更換蓋玻片的加熱室培養箱，TC-CSC

可用于成像和記錄。由加熱的底部底座和密封

床單。金屬底座有利于傳熱。溶液和腔室之間沒有接觸

防止離子泄漏的底座。附帶的頂部玻璃蓋玻片可用于從頂部密封樣品

從一個微型孵化器。頂部可以用附帶的金屬環固定，也可以用平的

顯微鏡適配器的彈簧。底部有一個凹陷的輪廓，以適合圓形或方形蓋玻片

隨附的O形圈允許您使用不同厚度的蓋片。把床單放進去

通過卡入操作用硅環密封，然后用頂部金屬環固定（硅環也可以

用顯微鏡適配器的平彈簧固定）。對于低剖面室，考慮TC-CSC-L設計，

不需要頂部夾鉗的地方。可作為灌注室，如果與微型導管結合使用

持有人。加熱元件內置可更換的聚四氟乙烯灌注管，使

元件用作直列預熱器。需要顯微鏡適配器和溫度控制器TC2-80-

150-C.項目#TC-CSC

•尺寸：直徑50 mm

•溫度穩定性：優于0.01℃，

內置傳感器

•溶液預熱器：可更換/可拆卸

聚四氟乙烯管，易于

•顯微鏡適配器：適用于

標準顯微鏡適配器MA和IMA

•工作容積：

25毫米蓋玻片-21毫米，約350微升

22x22毫米蓋玻片-19毫米，約280微升

20毫米蓋玻片-16毫米，約200微升

18mm蓋玻片-14mm，約150微升

13mm蓋玻片-9mm，約50微升

12毫米蓋玻片-8毫米，約50微升

10毫米蓋玻片-6毫米，約30微升

加熱微型培養箱

目錄號說明

TC-CSC-25可更換25m圓蓋卡瓦的加熱室

TC-CSC-20加熱室，可更換20毫米圓蓋卡瓦

TC-CSC-18可更換18mm圓蓋卡瓦的加熱室

可更換13mm圓蓋卡瓦的TC-CSC-13加熱室

TC-CSC-12可更換12mm圓蓋卡瓦的加熱室

TC-CSC22x22型

可更換的22x22平方毫米加熱室

蓋玻片

CS-30更換頂部玻璃蓋，用于CSC支架，30mm

直徑

 注：楊清辰發布