場焊劑帶（緬甸嘉實）I型（G）的eneral

＆
場焊劑帶（緬甸嘉實）II型（A）的ircraft
無損檢測：伯馬嘉實多條
磁帶

磁*條是一個簡單易用，廉價和有效的工具，提供您保證，您正在執行一個有效的磁粉檢測。

 
你有正確使用證明：

-足夠的磁場強度和方向

-適當的照明

-適當的磁粉性能

應采用磁帶，以確認所有所需的測試參數，包括：照明，磁場強度和方向，磁粉性能和覆蓋范圍足以發現表面裂紋大小等于或大于建成條狀的。

 
磁帶，可用于熒光，可見濕（黑白）以及干顆粒（帶或不帶對比度）。它們可以被用來與交流，FWDC和HWDC磁化，無論是縱向或圓形領域。

 
它們也可以用來證明這些方法之間的靈敏度差異和發展磁化技術，并保證*覆蓋。

 
他們應該是強制性的所有磁粉檢測程序的一部分。

 
*以前稱為“伯馬-嘉實多”條。他們是的Q.Q.I.形式可以取代“攤大餅”計。

NDT : Burmah Castrol Strips
 

Burmah-Castrol-Strips
Field Flux Strips （Burma Castrol） Type I （G）eneral
&
Field Flux Strips （Burma Castrol） Type II （A）ircraft
Magnetic Flux Strips

Magnetic Flux* Strips are a simple-to-use, inexpensive and effective tool that provides you with assurance that you are performing an effective magnetic particle test.

Their proper use proves that you have:

- Adequate field strength and direction

- Proper illumination

- Appropriate magnetic particle properties

Magnetic Flux strips should be used to confirm that all required testing parameters, including: lighting, field strength and direction, magnetic particle properties and coverage are sufficient to find surface cracks equal or greater in size than those built into the strip. 

Magnetic Flux  Strips can be used with; Fluorescent, Wet Visible （Black & White） as well as Dry Particles （with or without contrast）. They can be used with AC, FWDC and HWDC magnetization, with either longitudinal or circular fields. 

They can also be used to demonstrate the sensitivity differences between these methods and to develop magnetizing techniques and to assure complete coverage.

They should be a mandatory part of all Magnetic Particle testing procedures.

* Previously known as "Burmah-Castrol" Strips. They are a form of Q.Q.I. and could replace "pie" gauges.